Back to the
main site

 
 FAQFAQ    SearchSearch  RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The sole intent of this board is to provide an option to communicate quickly and effectively with the racing community. Any post considered to be mean-spirited in nature or contains false information will be deleted. Questions and comments are welcome and should be forwarded to spartanspeedway@gmail.com.
Click to View All Messages within 24 hours

Gears...

 
Post new topic   Reply to topic     Forum Index -> Pony Stocks
View previous topic :: View next topic  
Author Message
fastwon29



Joined: 13 Jan 2009
Posts: 13

PostPosted: Tue Jan 13, 2009 4:50 pm    Post subject: Gears... Reply with quote

Ok i have a 1987 dodge daytona, i am under the impression it has a 1.04 or 1.06 gear ratio. it was also suggested to me to try a .91 gear ratio set. so w/ that wich one will turn more rpms?..and any clue where i can get a .91 set of gears?
The car will be a Whittemore Speedway car, 1/4 mile high banked.
Also found a place that makes racing wheels, they only make 13 and 15 for the car, the car currently has 14 inch wheels. So 13 inch or 15 inch we have a maximum 60 series tire rule..
any help and info would be great! Very Happy
Back to top
View user's profile Send private message
goinincircles22



Joined: 27 Jul 2006
Posts: 191
Location: lansing

PostPosted: Tue Jan 13, 2009 9:47 pm    Post subject: Reply with quote

Heres a chart for you on all the different chrysler gear combinations.

Charts for determing gear ratio combinations for
front wheel drive Mopars with 413 type transmissions

NOTE: The transfer gears are located inside the cover
on the driver's side of the transaxle. The output gear is
towards the front while the driven gear is towards the
rear.
The pinion gear is on the end of the shaft that the driven
gear is mounted to. The pinion gear drives the ring gear
located inside the rear differential cover.


Available transfer gearsets:

ratio Output/driven teeth
0.91 57/52
0.96 56/54
1.04 45/47
1.06 53/56
1.22 49/60


Available ring/pinion gearsets:

ratio Pinion/ring teeth
2.86 21/60
3.05 20/61


Final drive ratio (in third gear):
(transfer x ring/pinion)

ratio combination
2.60 0.91/2.86
2.75 0.96/2.86
2.78 0.91/3.05
2.93 0.96/3.05
2.97 1.04/2.86
3.03 1.06/2.86
3.17 1.04/3.05
3.23 1.06/3.05
3.49 1.22/2.86
3.72 1.22/3.05


Transmission gear ratios:

ratio range
2.69 First
1.55 Second
1.00 Third


Combined available ratios:
(final drive x range selection)

ratio combination
4.03 2.60/Second
4.26 2.75/Second
4.30 2.78/Second
4.54 2.93/Second
4.61 2.97/Second
4.70 3.03/Second
4.92 3.17/Second
5.01 3.23/Second
5.41 3.49/Second
5.77 3.72/Second
7.00 2.60/First
7.39 2.75/First
7.47 2.78/First
7.88 2.93/First
8.00 2.97/First
8.16 3.03/First
8.53 3.17/First
8.70 3.23/First
9.39 3.49/First
10.01 3.72/First
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Pony Stocks All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group